1. The castings structure is quite complicated. That’s why we design the following mold and sliders’ structure in this project, which is different from the traditional ways.
2. This mold is formed by 5 hydraulic cylinders.
3. There are long slides insert holes and three cast-in inserts in the ejector die, one of which is inside the casting part.
No. of Cavities: 1*8
No. of Sliders: 0
Die casting machine: 560T/750T
Mold Size(mm): 820*540*545
Build Time: 30 days
Tel: +86 755-2344 8600